Yes, the Marauder is the new kid on the tire Preloaded [CFP] Airgun block that can not be punked. After being air rifle in the world for 35 years and starting a business in the shooting sports in the last 6 years I have developed an appetite for quality product, fair value and integrity of the manufacturer.
I have my .22 Benjamin Marauder mid-July 2009. There are so many messages, as stated, by the holders of a series of personal communicationsExperiences. After reading a number of these places, you will find that the relationship ever so closely that seem redundant.
The relationship of correspondence on the Marauder argued that the baseline performance, one might expect, you should be a Marauder owners. My report confirms many of the qualities of performance that I have read include original observations and add to the current experience Marauder.
I agree with many of the favorableReports of the Marauders, including:
To arrive or after first opening the box with the Marauder you know the feeling
paid more than you. It is not something you often feel in those days.
Fine or loss of quality is noble, and visible.
Report or as quiet stealth. Really!
o You can fill out the shots at full power for 35-45 and even more depending on the settings melody.
o The ability to adjust the entire range of personal development components of a PCP is aFunction, with the Marauder and is aimed at an audience with a wide range of experience levels.
makes this gun barrel or suffocated very accurate and, probably, a shooter better than many of their owners.
o The trigger is very friendly to boot and adjustable in width.
Here are some of my personal observations:
Rotary Magazine
While the new owners "know" the time, if not very familiar with the technical management of the Marauder, user error,not a malfunction of the device can randomly get a load of more than one ball in the gap. This can happen if you do not pull the bolt until it cocks. Then allows the bolt to slide forward under spring pressure, the pressure in a pellet of partially or completely in violation of results. The natural thing to do when you discover that the weapon is armed, it spreads around to try again. If you tighten the screw again the second time, the magazine free drum to the index next to pelletimpetus behind the existing pellet shattered when you close the bolt again.
Solution 1 - Point the muzzle in a safe direction and use a still appropriate. Now the gun fire and then the number of pellets into the breech. This should not be a problem if you 800psi (never felt less pressure) or higher have on-board memory.
Solution 2 - completely depressurized the rifle with the methods of degassing tool (see instructions). Then follow the instructions to remove ajammed pellets. Remember, you will be far more than one tablet at the same time, causing increased friction of the pellet hole. Take your time and do not pay in a bar, the trains will use the damage.
New users can also spend Marauder up efforts to crack down on what appears to be a "plug in" his magazine. Surely the music magazine correctly when used correctly, will not have this problem if you are more familiar with the operation and the relationship between theBolts and drum magazine. A common cause for a magazine "locked" is that the rotating shaft of lives may be partly in the journal. Just pull the bolt back in position further back and the magazine can be removed. (To clarify the focus always the gun in a safe direction broken every pellet.)
Another cause is partly pellets. The closing of the bolt completely, in order to push the pellet completely in breach, and then pull and hold the bolt is free of charge back into the rearmost position, theJournal of removal. (To clarify the focus always the gun in a safe direction broken every pellet.) Most of the owners can never experience these problems, but if you do, know that the magazine is not rotating.
The protection of the Shroud
This caution applies to the majority of family physicians and should be useful to avoid unintentional damage to the matt surface of the cover you. There is risk of damage to the area draped over the barrel to fill the probe. The quick release valve can/ Scratch scratch the bottom of the barrel wrapped when to connect and disconnect the filler pipe. This can be solved by installing pipes to reduce or packaging or other permanent electrical tape around the mounting hardware and quick release (Note: Be careful not to disturb your shrink tubing or tape with the quick release moving parts). If nothing else, at least a barrier (such as a cloth, gun socks, etc.) on the barrel that came through his fastseparate hardware. Over time you will be happy to practice careful handling during the release are.
One of my settings perfect harmony
A hundred thieves and can be prepared and among them a certain degree of uniqueness of the performance characteristics are. So, with my setup, not the same results in your rifle. You must take the time to experiment with your gun to achieve the desired performance. Here are the settings I use in order to obtain a satisfactory basisField distance (BFD): Hammer voltage 6, 4 and stroke speed adjustment Hammer 2.5. (The manual says to set the parameters for the tuning of various components). This setting produces on average 915 meters per second [fps] with Crosman Premiers 14.3gn (CP) for a total of just over 26 foot-pounds of energy [FPE ]..... I have more than 30 shots at full power with this configuration. When using dynamic PCP2 14.5gn with the same attitude I get 940 FPS in which 28 FPE.
Report and the trajectoryShooting down
Marauder's door especially on long distance reception conditions. 3 times more - The Marauder is not established by PCP involves a lot of money to be punked 2.
Install a quality field of mil point and enjoy the process of capturing long-range-keep / hold-over data.
Once this is for your Pellets (s) immediately made the choice of data is invaluable. They are most certainly at distances out to 75 meters and shootbeyond. My farthest string away was shot during a 15 mph wind left to right at 108 meters, for a 4 "group. There was no doubt that the gun was made to shoot. I'll see at that distance once again resumed under better conditions. In addition to shooting 108yds groups, I also ran one of my low-tech penetration testing, with a soup can (cans are too thin). Every shot entered and left the can, then embedded in standing tree. 14.3gn At 108yds the CP pellet traveling at 421 FPS6 FPE and reserves. My current maximum range of selected effective range is 70 meters. They are 70 meters to 549 fps 14.3gn CP, travel, supplies 9.5 FPE at the Point of Impact (POI) and point my goal [POA] to install the POI between the right to ¾ of an inch.
Crosman Customer Service
I had the pleasure, and on some occasions, the displeasure of working with a number of customer service teams of the shooting sports industry. My contact was with the Crosman Customer Service employeeone of the most satisfactory treatment, respectful and sensitive experiences I've had in any service sector. Crosman respectfully listen to my concerns, answered my questions and checked with me to ensure I was satisfied with their decisions. I'm still flat, as I by the time I received a call from a representative check in Crosman, who knew that I was sick of thinking at home for the day. Janet colleagues were very helpful during their absence. However, it was importantJanet know I was a satisfied customer, even if it was not in the office that day. Crosman treated me like a valued customer. Congratulations to Crosman Corporation for Excellence in Customer Care
I am currently putting the Marauder for further testing (such as hunting, silhouette pellets different graphics settings more melodic and more ...). Certainly an important measure of reliability in the Marauder's time. Unfortunately, my time machine under the current five-year maintenance contractService. Therefore, the Marauder has periodically tested the old fashioned way
The Benjamin Marauder lives up to its claim and is rapidly establishing a place of respect for the quality of adult family sniper rifles air CFP.
If you are getting the Marauder MagPro report were useful and would like to challenge myself and test your products sector air rifle, I welcome the opportunity to work with your company.
0 comments:
Post a Comment